Standard Horizon HX400IS

Handy TalkieStandard Horizon

SKU: HT-5100-3016

Untuk Brosur, Buku Manual dan Video Bisa klik dibawah ini :

Brosure   Manual  Video

 

Support & Penawaran Harga :

WhatsApp : 0818070 30895 

e-Mail :  infoglobalhutama@gmail.com

Rp0

  • Intrinsically safe
  • Submersible IPX8 (4.92 feet or 1.5 meters for 30 minutes)
  • Selectable 5 or 1 Watt transmit power output
  • Noise Cancelling Microphone
  • 40 Programmable Land Mobile Channels 134 MHz to 174 MHz with CTCSS and DCS signaling
  • Programmable channel names
  • NOAA Weather channels and Weather Alert
  • Low battery indicator
  • Built in Voice Scrambler for private communications
  • All USA, International and Canadian Marine Channels
  • Optional speaker microphones and headsets available
  • Supplied with 2300mAh Li-Ion battery, and 110 VAC 3-hour quick charger
  • Programmable Scan, Priority Scan, Tri-watch and Dual Watch
  • Preset key used to recall up to 10 favorite channels
  • Key lock
SKU: HT-5100-3016 Category: Tag:
brands

Handy Talkie, Standard Horizon

GENERAL
Frequency Range (MHz)156MHz – 163.275MHz (Marine Band + WX Band)
134MHz – 174MHz (LMR Band)
Channel Steps25 kHz (25.0/12.5 kHz LMR)
Frequency Stability±2.5ppm (-30ºC to 60ºC)
Emission Type16K0G3E, 16K0F3E, 11K0F3E
Antenna Impedance50 Ohms
Supply Voltage7.4 V DC
Current Consumption320 mA (Receive), 50 mA (Standby)
TX: 1.6 A (H)/0.8A (L)
Operating Temperature-30º C to +60º C
Waterproof rating:30 minutes @ 1.5 meter depth (IPX8)
Case Size (W x H x D)57 x 133 x 40 mm w/o knob & Antenna
Weight (Approx.)350 g with FNB-115LIIS
TRANSMITTER
RF Output Power5 W / 1 W @7.4V
Modulation TypeVariable Reactance
Maxiumum Deviation±5 kHz (Wide)/±2.5 kHz (Narrow)
Spurious EmissionAt least 36 dB below
Microphone Impedance2 k-Ohm
RECEIVER
Circuit TypeDouble-Conversion Superheterodyne
Intermediate Frequencies1st: 67.65MHz
2nd: 450 kHz
Sensitivity0.25 ㎶ 12 dB SINAD
Adijacent Channel Selectivity70 dB (Wide) / 60 dB (Narrow)
Intermodulation response68 dB (typical)

Standard Horizon reserves the right to make changes and enhancements to products at our discretion. Current specifications are therefore subject to change without notices

INTRINSIC SAFETY (IS) INFORMATION

The HX400IS, equipped with any of the following optional units, meets the requirement of ANSI/UL 913 5th Edition for Class I, II, III
Division 1, Group C, D, E, F, G, T3 for hazardous locations.
Battery Pack:     FNB-115LIIS (Li-Ion battery pack)
Speaker Microphones: MH-66D4B and CMP460

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Standard Horizon HX400IS”

There are no reviews yet.

× Butuh Bantuan?