Icom IC-FR5300

IcomRepeater

SKU: REP-650002

Untuk Brosur, Buku Manual dan Video Bisa klik dibawah ini :

Brosure   Manual  Video

 

Support & Penawaran Harga :

WhatsApp : 0818070 30895 

e-Mail :  infoglobalhutama@gmail.com

Rp0

brands

Icom, Repeater

Output Power:

50W (50% Duty Cycle)

Frequencies:

136-174 VHF/ 400-470, 450-512 UHF

Channels:

32

Height:

2U

Digital Conventional:

IDAS™ built-in

Digital Trunking:

Optional Boards/Modules

IDAS™ Simulcast Systems

Installing the UC-FR5300 and the CF-FR5300 (SC) allows simulcast which increases coverage and eliminate dead spots. The IDAS™ Simulcast transmits digital repeater signals and GNSS synchronization signals on the same frequency to reduce signal loss in overlapping signal areas. Simulcast automatically selects the best signal by each repeater to distribute and retransmit. Compared to conventional multi-site systems, all NXDN™ compatible IDAS™ radios do not have to scan, vote or roam.

IP Remote Maintenance and Control

When connected to an IP network*, users can PC program, configure IP address settings, and monitor SNMP traps and Syslogs from a remote location. The RC-FS10 can be used as a simple dispatch station to communicate with other radio terminals through the repeater. Use the VE-PG4 RoIP gateway for connection to other protocols and telephone interfaces.

*With the optional UC-FR5300 network/controller board

Icom IC-FR5300 Specifications

General
Frequency coverage
FR5300
136–174 MHz
FR6300
400-470 MHz
450-512 MHz
Number of channels 32 channels / 1 zone
Type of emission
16K0F3E (25 kHz)
11K0F3E (15 kHz)
8K50F3E (12.5 kHz)
4K00F1E/F1D (6.25 kHz)
Power supply requirement 13.6 V DC nominal
Current drain (approx.)
Tx

Rx

15.0A maximum (at 50W)
8.0A maximum (at 50W)
1.9A /500 mA (Maximum audio /Standby (Fan OFF))
Antenna impedance 50Ω
Operating temperature range -30 °C to +60 °C
-22 °F to +140 °F
Dimensions (W x H x D)
FR5300 / FR6300
483 × 88 × 260 mm,
19.0 × 3.5 × 10.2 in
UR-FR5300 / UR-FR6300
176 × 60 × 194 mm,
6.9 × 2.4 × 7.6 in
Weight
FR5300 / FR6300
5.78 kg
12.7 lbs
UR-FR5300 / UR-FR6300
2.1 kg
4.6 lbs
Transmitter
Output power (Hi, L2, L1) 50W, 25W, 5W
Frequency stability ±1.0 ppm or less
±0.1 ppm or less (corrected using GNSS)
Spurious emissions 80 dB typ.
0.25 µW (≤; 1 GHz), 1.00 µW (> 1 GHz)
Max. frequency deviation
Digital
Analog
±1.203 kHz – 1.471 kHz (EN301 166) ±5.0 kHz / ±2.5 kHz (25 kHz / 12.5 kHz)
±5.0 kHz / ±4.0 kHz / ±2.5 kHz (25 kHz/20 kHz/12.5 kHz)
FM Hum and Noise
FR5300
83 / 77 dB typ.
(25 / 12.5 kHz)
FR6300
72/67 dB typ.
(25 / 12.5 kHz)
Residual modulation (With CCITT filter)
FR5300
82 / 82 / 79 dB typ.
(25 / 20 / 12.5 kHz)
FR6300
76 / 74 / 71 dB typ.
(25 / 20 / 12.5 kHz)
Audio harmonic distortion
FR5300
0.9% typ.
(AF 1 kHz 40% deviation)


1.1% typ.
(AF 1 kHz 40% deviation)

FR6300
0.8% typ.
(AF 1 kHz 40% deviation)


0.8% typ.
(AF 1 kHz 40% deviation)

FSK Error 0.6% typ

Receiver

FR5300 FR6300
Sensitivity
Digital (1% BER)


Analog (12 dB SINAD)


Analog (20 dB SINAD)

–4.0 dBµV (0.32 µV) emf typ.


–119 dBµV (0.25 µV) typ.


–4.0 / –4.0 / –1.0 dBµV emf typ.
(25 / 20/ 12.5 kHz)

–3.5 dBμV (0.33 µV) emf typ.


–117 dBm, (0.32 µV) typ.


–3.0/–3.0/0.0 dBµV emf typ.
(25 / 20 / 12.5 kHz)

Adjacent channel selectivity
Digital


Analog

66 dB typ.


85 / 80 dB typ. (25 / 12.5 kHz)
84 / 83 / 78 dB typ. (25 / 20 / 12.5 kHz)

63 dB typ.


80 / 56 dB typ. (25 / 12.5 kHz)
78 / 78 / 74 dB typ. (25 / 20 / 12.5 kHz)

Spurious response rejection
Digital


Analog

87 dBµV emf typ.


85 dB typ.
81 dB typ.

85 dBµV emf typ.


84 dB typ.
81 dB typ.

Intermodulation rejection
Digital


Analog

78 dBµV emf typ.


81 / 81 dB typ. (25 / 12.5 kHz)
75 / 74 / 73 dB typ. (25 / 20 / 12.5 kHz)

78 dBµV emf typ.


80 / 80 dB typ. (25 / 12.5 kHz)
74 / 74 / 73 dB typ. (25 / 20 / 12.5 kHz)

Audio output power 3.9W typ. (at 5% distortion with 4Ω load)

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and pased the following MIL-STD requirements and strict environmental standards.

Standard MIL 810F
Method Proc.
Low Pressure 500.5 I, II
High Temperature 501.5 I, II
Low Temperature 502.5 I, II
Temperature Shock 503.5 I-C
Solar Radiation 505.5 I
Humidity 507.5 II
Dust Blowing 510.5 I
Vibration 514.6 I
Shock 516.6 I

Also meets equivalent MIL-STD-810-C, -D and -E.

Measurements made in accordance with TIA-603 (for Analog FM). All stated specifications are subject to change without notice or obligation.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Icom IC-FR5300”

There are no reviews yet.

× Whatsapp