The IC-V86 gives you more audio, more RF power, more coverage and more battery capacity in a compact, MIL-STD portable. With 1.5W of receive audio power and a new chassis design, the IC-V86 enables users to hear incoming signals in loud, noisy environments. The IC-V86 expands users radios coverage with 7W of RF output power and the new 2250mAh Li-Ion battery pack provides longer operational capabilities.
Output Power: | | 7.0/5.5/2.5/0.5 Watts |
RX Frequencies: | | 136-174 MHz |
Channels: | | 207 (200 regular, 6 scan edges, 1 call) |
Waterproof Rating: | | IP54 |
General |
---|
Frequency coverage (Guaranteed)
TX:
RX: | 144–148 MHz
136–174 MHz |
Number of channels | 207 channels (200 memory channels, 1 call channel and 6 scan edges) |
Type of emissions | F2D, F3E (FM, FM-N) |
Power supply requirement | 7.5V DC |
Frequency stability | ±2.5 ppm (–20 ˚C to +60 ˚C, –4 °F to +140 °F) |
Current drain
TX (EX Hi/Hi/Mid/Low)
RX (Max. audio) | 1.6/1.4/1.0/0.5 A typical
450 mA typ. (INT SP),
200 mA typ. (EXT SP) |
Antenna impedance | 50Ω |
Operating temperature range | -20°C to 60°C; –4°F to +140°F |
Dimensions (W×H×D)
(Projections not included) | 58.6 × 112 × 30.5 mm, 2.3 × 4.4 × 1.2 in (with BP-298) |
Weight (Approximate) | 300 g, 10.6 oz (with BP-298, FA-B57V) |
Transmitter |
---|
Output power | *7.0/5.5/2.5/0.5 W (EX Hi/Hi/Mid/Low) |
Max. frequency deviation | ± 5.0kHz/±2.5kHz (Wide/Narrow) |
Spurious emissions | Less than –60 dB |
Ext. microphone connector | 3-conductor 2.5 (d) mm (1⁄10″)⁄2.2 kΩ |
Receiver |
---|
Sensitivity | –124 dBm typical |
Squelch sensitivity | –126 dBm typical |
Selectivity (Wide / Narrow) | 75 dB typical / 70 dB typ. |
Intermodulation | 65 dB typical |
Ext. speaker connector | 3-conductor 3.5 (d) mm (1⁄8″)/ 8Ω |
Audio output power
Internal SP (w/8Ω load)
External SP (w/8Ω load) | 1500 mW typical
550 mW typical |
*7w output from 144 – 160 MHz. 5.5w 136 – 144 MHz/160 – 174 MHz
All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications
Icom makes rugged products that meet MIL-STD requirements and strict environmentalstandards as follows.
The IC-V86 tested to and passed MIL-STD-810 C, D, E, F & G environmental tests.
Standard | MIL 810G |
|
Low Pressure | 500.5 | I, II |
High Temp. | 501.5 | I, II |
Low Temp. | 502.5 | I, II |
Temp. Shock | 503.5 | I-C |
Solar Radiation | 505.5 | I |
Rain Blowing/Drip | 506.5 | I, III |
Humidity | 507.5 | II |
Salt Fog | 509.5 | – |
Dust Blowing | 510.5 | I |
Vibration | 514.6 | I |
Shock | 516.6 | I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
Ingress Protection Standard |
Dust & Water | IP54 (Dust-protection, water resistance) |
Supplied Accessories
- Battery pack, BP-298
- Desktop charger, BC-240
- AC Adapter, BC-242
- Belt clip, MB-124
- Antenna
There are no reviews yet.