The IC-V86 gives you more audio, more RF power, more coverage and more battery capacity in a compact, MIL-STD portable. With 1.5W of receive audio power and a new chassis design, the IC-V86 enables users to hear incoming signals in loud, noisy environments. The IC-V86 expands users radios coverage with 7W of RF output power and the new 2250mAh Li-Ion battery pack provides longer operational capabilities.
Output Power:
|
|
7.0/5.5/2.5/0.5 Watts |
RX Frequencies:
|
|
136-174 MHz |
Channels:
|
|
207 (200 regular, 6 scan edges, 1 call) |
Waterproof Rating:
|
|
IP54 |
| brands |
Handy Talkie, Icom
|
| General |
Frequency coverage (Guaranteed)
TX:
RX: |
144–148 MHz
136–174 MHz |
| Number of channels |
207 channels (200 memory channels, 1 call channel and 6 scan edges) |
| Type of emissions |
F2D, F3E (FM, FM-N) |
| Power supply requirement |
7.5V DC |
| Frequency stability |
±2.5 ppm (–20 ˚C to +60 ˚C, –4 °F to +140 °F) |
Current drain
TX (EX Hi/Hi/Mid/Low)
RX (Max. audio) |
1.6/1.4/1.0/0.5 A typical
450 mA typ. (INT SP),
200 mA typ. (EXT SP) |
| Antenna impedance |
50Ω |
| Operating temperature range |
-20°C to 60°C; –4°F to +140°F |
Dimensions (W×H×D)
(Projections not included) |
58.6 × 112 × 30.5 mm, 2.3 × 4.4 × 1.2 in (with BP-298) |
| Weight (Approximate) |
300 g, 10.6 oz (with BP-298, FA-B57V) |
| Transmitter |
| Output power |
*7.0/5.5/2.5/0.5 W (EX Hi/Hi/Mid/Low) |
| Max. frequency deviation |
± 5.0kHz/±2.5kHz (Wide/Narrow) |
| Spurious emissions |
Less than –60 dB |
| Ext. microphone connector |
3-conductor 2.5 (d) mm (1⁄10″)⁄2.2 kΩ |
| Receiver |
| Sensitivity |
–124 dBm typical |
| Squelch sensitivity |
–126 dBm typical |
| Selectivity (Wide / Narrow) |
75 dB typical / 70 dB typ. |
| Intermodulation |
65 dB typical |
| Ext. speaker connector |
3-conductor 3.5 (d) mm (1⁄8″)/ 8Ω |
Audio output power
Internal SP (w/8Ω load)
External SP (w/8Ω load) |
1500 mW typical
550 mW typical |
*7w output from 144 – 160 MHz. 5.5w 136 – 144 MHz/160 – 174 MHz
All stated specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications
Icom makes rugged products that meet MIL-STD requirements and strict environmentalstandards as follows.
The IC-V86 tested to and passed MIL-STD-810 C, D, E, F & G environmental tests.
| Standard |
MIL 810G |
| Low Pressure |
500.5 |
I, II |
| High Temp. |
501.5 |
I, II |
| Low Temp. |
502.5 |
I, II |
| Temp. Shock |
503.5 |
I-C |
| Solar Radiation |
505.5 |
I |
| Rain Blowing/Drip |
506.5 |
I, III |
| Humidity |
507.5 |
II |
| Salt Fog |
509.5 |
– |
| Dust Blowing |
510.5 |
I |
| Vibration |
514.6 |
I |
| Shock |
516.6 |
I, IV |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
| Ingress Protection Standard |
| Dust & Water |
IP54 (Dust-protection, water resistance) |
Supplied Accessories
- Battery pack, BP-298
- Desktop charger, BC-240
- AC Adapter, BC-242
- Belt clip, MB-124
- Antenna
There are no reviews yet.